Viewing The Various Functions On Your System; Setting The Clock - Samsung MM-ZB9 Instruction Manual

Viewing the Various Functions on
Your System
GB
You can view the various functions available on your system.
1
Press the Demo button.
Result: The various functions available are listed in turn on the
All these functions are described in detail in this booklet.
For instructions on how to use them, refer to the appropriate
sections.
2
To cancel this function, press Demo again.
On/Standby
Phones
10
Downloaded From Disc-Player.com Samsung Manuals
display.
TUNER
/Band
Demo
REC/Pause
C D
CD Synchro
TAPE
AUX
CD Repeat
Tuning Mode

Setting the Clock

Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the micro component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby (
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Program/Set.
Result: The hour flashes.
4
To...
Po
Increase the hours
Surr
Decrease the hours
Sle
5
When the correct hour is displayed, press Program/Set.
Mon
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7 When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
You can use the Multi Jog to instead
4,6.
1
EQ/S.Bass
REV.
CD SYNC.
Mode
3,5,7
Repeat
Program/
Set
4,6
) .
Press...
Press...
/ button in step
Timer Timer/
On/Off
Clock
2
Sleep Aux
TAPE
RDS
Display PTY
CD
+10
Band
VOL.
TUNE/CD
Mode
4,6
VOL.