Bevel/Miter Settings - Craftsman CMXEMAR120 Instruction Manual

English

Bevel/Miter Settings

nOTE: The chart below references a compound cut for crown molding OnlY WhEn ThE AnglE BETWEEn ThE
WAlls EQUAls EXACTlY 90°.
BEVEl AnglE
KEY
sETTing
IL 33.9°
IR 33.9°
OL 33.9°
OR 33.9°
22
MiTER AnglE
sETTing
1. Position top of molding against fence.
31.6° Right
2. LEFT side is finished piece.
1. Position bottom of molding against fence.
31.6° Left
2. LEFT side is finished piece.
1. Position bottom of molding against fence.
31.6° Left
2. RIGHT side is finished piece.
1. Position top of molding against fence.
31.6° Right
2. RIGHT side is finished piece.
TYPE OF CUT
inside Corner - left side
inside Corner - Right side
Outside Corner-left side
Outside Corner - Right side