Advertisement
3. Loosely install the right saddlebag panel as shown.
ISOPROPYL ALCOHOL
Thoroughly clean the area where the
right saddlebag panel will be attached.
(. Install the right saddlebag panel securely as shown.
ADHESIVE bACKINGS
Pull out while pressing on the right saddlebag panel.
ADHESIVE bACKINGS
Pull out while pressing on the
right saddlebag panel.
RIGHt
SADDLEbAG
ADHESIVE bACKINGS
Pull out while pressing on the
right saddlebag panel.
5. Apply adequate pressure to the attached right
saddlebag panel.
2 of 2
RIGHt
SADDLEbAG
RIGHt
SADDLEbAG
PANEL
ADHESIVE bACKINGS
Pull out while
pressing on the right
saddlebag panel.
RIGHt
SADDLEbAG
PANEL
87963-MGS-A500
6. Secure the saddlebag panel with the push rivet as
shown.
RIGHt
SADDLEbAG
RIGHt SADDLEbAG
PANEL
Drive the pin of the push rivet using a drift and plastic
hammer.
PIN
Drive.
7.
Attach the right emblem in the position shown.
RIGHt SADDLEbAG
PANEL
8. Repeat steps 1 through 7 on the left side.
PuSH RIVEt
Insert.
DRIFt
ISOPROPYL ALCOHOL
Thoroughly clean the area where
the right emblem will be attached.
RIGHt EMbLEM
Remove the adhesive
backing before attaching.
© 2012 Honda Motor Co., Ltd. - All Rights Reserved.
Advertisement
