Installation Using Pole Mount Bracket - Samsung SNC-C7478 User Manual

installation
❖
RS-485 Termination Resistor
ON
ON
1 2 3
• Pin 8 is used for ON/OFF of RS-485 Termination.
Normally, it must be OFF state. Especially when you
have trouble with long Daisy chain style connection,
turn ON this termination switch of last camera.
– Pin 8 : RS-485 Termination Resistor (ON/OFF)
INSTALLATION USING POLE
MOUNT BRACKET
1. Using the paper template, mark the holes on the
wall.
2. After drilling the holes, fi x the four anchor bolts
into the holes.
12 – 36x Network Smart Dome Camera
4 5 6 7 8
3. After locating the wall mount bracket on the
anchor bolts properly. Tighten the nuts for anchor
bolts
4. Connect cables to terminal blocks and BNC in the
Network box. See the cabling in the next section.