Using The Camera - Samsung SNC-C7478 User Manual

web viewer
+ Preset / Pattern / Auto Pan / Scan Buttons
Preset: Run, Save or Delete the Preset positions memorized in the camera.
Pattern: Run the Pattern function programmed in the camera. (To create this function, use OSD Menu.)
Auto Pan: Run the Auto Pan function stored in the camera. (To create this function, use OSD Menu.)
Scan: Run the Scan function programmed in the camera. (To create this function, use OSD Menu.)
| Reset currently activated alarm events (alarm input/output, motion detection).
(The Alarm Reset forces all Alarm Output to be OFF state and the Motion Reset will remove the icon displayed
when motion is detected.)
{ Check the Listen or Speak check box for Audio.
POWER PTZ
You can use the cursor to manipulate PTZ of the camera in the Web Viewer.
- Click the Live Screen to position the cursor area in the center of the screen.
- Click and drag the Live Screen to the lower right corner to zoom in the image.
- Click and drag the Live Screen to the upper left corner to zoom out the image.

USING THE CAMERA

❖
To Capture a Video
1. At a desired scene, click the [CAPTURE] button.
•
The capture confi rmation window appears.
2. Click [OK].
•
The captured screen image is saved in the specifi ed folder path.
M

Default save paths are provided for each version of Windows.
Windows XP: C:\Program Files\Samsung\SNC-C7478\SnapShot\Live
To change the saving path, click [SAVE PATH] button(
Windows Vista: C:\users\[user ID]\AppData\LocalLow\Samsung\SNC-C7478\SnapShot\Live
The save path cannot be changed if you are using Windows Vista.

The fi le is automatically named as follows: <IP address_Port number_YYMMDD_camera number_index>
ex) 192.168.0.201_60001_20090517_180929_00
❖
To Print a Video
1. At a desired scene, click the [PRINT] button.
•
The print setup window appears.
2. Click [OK].
•
The captured screen image is printed.
52 – 36x Network Smart Dome Camera
) and then select the path you want.