Release 10.5
塑料和聚合物部件
○
表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下。
:
表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006
×
:
标准规定的限量要求。
10.3
RF EXPOSURE SEPARATION DISTANCES
To protect from overexposure to RF energy, install Canopy radios so as to provide and maintain
the minimum separation distances from all persons shown in
Module Type
Canopy Module (FSK or OFDM)
Canopy Module with Reflector Dish
Canopy Module with LENS
900 MHz, integrated or connectorized antenna
Indoor 900 MHz SM
The following section and its
calculations.
10.3.1 Details of Exposure Separation Distances Calculations and Power
Compliance Margins
Limits and guidelines for RF exposure come from:
US FCC limits for the general population. See the FCC web site at
http://www.fcc.gov, and the policies, guidelines, and requirements in Part 1 of
Title 47 of the Code of Federal Regulations, as well as the guidelines and
suggestions for evaluating compliance in FCC OET Bulletin 65.
Health Canada limits for the general population. See the Health Canada web
site at
ICNIRP (International Commission on Non-Ionizing Radiation Protection)
guidelines for the general public. See the ICNIRP web site at
http://www.icnirp.de/
Electric, Magnetic, and Electromagnetic Fields.
The applicable power density exposure limits from the documents referenced above are
10 W/m
Peak power density in the far field of a radio frequency point source is calculated as follows:
FCC Draft, November 2010
○
○
○
Table 13: Exposure separation distances
Table 14
provide details and discussion of the associated
http://www.hc-sc.gc.ca/rpb
and Guidelines for Limiting Exposure to Time-Varying
2
for RF energy in the 5.7/5.8-GHz frequency bands.
Release Notes and User Guide Supplement
○
○
Table
13.
Separation Distance from Persons
At least 20 cm (approx 8 in)
At least 1.5 m (approx 5 ft)
At least 50 cm (approx 20 in)
At least 80 cm (32 in)
At least 10 cm (4 in)
and Safety Code 6.
×
Page 39