Advertisement
V .
C O M F O R T
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 30.5–48 cm (12–19 in. ).
To rotate the ELRs:
1. Push in release lever A. See figure 22.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B. See figure 22.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension. See figure 22.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Multi-Axis Foot Plates
The multi-axis foot plate assembly can be installed on ei-
ther a swing-away footrest or an elevating leg rest. The
multi-axis foot plate has four adjustments: leg rest length
(A), position (B), tilt (C), and angle (D). See figure 23.
To change leg rest length (A):
1. Remove the hardware.
2. Move the leg rest to the desired position.
3. Reinstall the hardware.
To change foot plate position (B):
1. Remove the hardware.
2. Move the foot plate to the desired position.
3. Reinstall the hardware.
To change foot plate tilt (C):
1. Loosen the hardware.
2. Tilt the foot plate to desired position.
3. Tighten the hardware.
To change foot plate angle (D):
1. Turn the setscrew clockwise to decrease the angle.
2. Turn the setscrew counterclockwise to increase the
angle.
28
A D J U S T M E N T S
LEG REST EXTENSION
Figure 22. Elevating Leg Rests
A
C
SETSCREW LOCATION
Figure 23. Multi-Axis Foot Plate (ELR Shown)
www.pridemobility.com
RELEASE LEVER A
RELEASE LEVER B
ADJUSTMENT SCREWS
A
B
D
B
D
C
Jazzy 1402
Advertisement
