Samsung SCC-B9372 Operating Instructions Manual page 8

INSTALLATION METHOD
Bracket & Camera Mounting
- Install the Mounting Bracket at the desired location.
Connecting to Monitor and Power
- Set the impedance switch to the 75 standard position unless a video equipment is connected
to the monitor video out.
- Adaptor: AC24V / 800mA or DC12V / 1A (AC24V / DC12V Model)
• Be sure to connect power after all the installation is done.
• Do not use power sources other than that specified.
- After adjusting view angle, cap over the camera with the sun-shield and fix it to the camera with
the sun-shield bolt.
04_ function & installation