Samsung SCC-5399N User Manual page 23

e
m
e.
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
t
effective screen as well using the

Note :
If the digital zoom factor is set to larger than 1x, the FENCE
–
function will be deactivated.
The DIGITAL ZOOM function enlarges the pixel itself, which can
cause deterioration of the quality.
.
❖
DETAIL
L
Controls the horizontal or vertical distinction.
❖
V-SYNC
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal
synchronization.
If selecting LINE, the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE.
DIGITAL ZOOM
RATIO [X1.0]
< LOCATION >
[0~3]
[INT, LINE]
How to use OSD Menu

Note :
–
Use of DC 12V will fi x V-SYNC to INT, which can not be
changed.
❖
AGC COLOR SUP
Adjust the color scheme according to the AGC value.
❖
REVERSE
Mirrors video signals horizontally, vertically, or both.
❖
POSI/NEGA
Output as it is or mirror the video brightness signal.
❖
PIP
Displays a sub image together with the main image on
switch.
the same screen using the Picture In Picture function.

Note :
–
If more than one privacy zone is set and the PRIVACY SET is
set to ON, the PIP function will be deactivated.
–
If the INTELLIGENCE function is set to FENCE mode, the PIP
menu will be deactivated.
❖
DIS
Digital Image Stabilization will set the anti-shake
compensation.

Note :
–
If you set DIS to ON, the compensation area will be enlarged as
set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged
zoom factor for the compensation, the DIS function will be
deactivated.
[LOW , MID, HIGH]
[OFF, H, V, H/V]
[+, -]
[OFF, ON]
[OFF, ON]
English 23
–