Table of Contents
Related Manuals for Samsung SCC-B5344
Summary of Contents for Samsung SCC-B5344
-
Page 1: Operating Instructions
Digital Color Dome Camera operating instructions imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register SCC-B5344 SCC-B5345... -
Page 2: Safety Precautions
Safety Precautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. -
Page 3: Fcc Statement
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray water directly onto parts of the product. -
Page 4: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) -
Page 5: Table Of Contents
Contents Overview ...6 About this guide ...6 Product overview ...6 Main features ...6 Components ...6 Checking components in the package ...6 Components of your camera ...7 Installation ...8 Setting switches ...8 Setting function switches ...8 Connecting cables and changing the settings ...10 Installing camera ... -
Page 6: Overview
Overview About this guide ❚ This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows: Chapter 1, “Overview,” introduces the user guide and product related information. (This chapter) Chapter 2, “Installation,”... -
Page 7: Components Of Your Camera
Components of your camera Your camera has the following components: Lens Video connector Power connector 1 Cover dome: Covers the main body for protection. 2 Main body: Includes a lens, a switch board, a PCB board, screws, and such. 3 Mount bracket: Used as a ceiling or wall fixture. It is fixed using three long tab screws provided in the package. -
Page 8: Installation
Installation Setting switches ❚ Setting function switches To set the available functions on your camera, adjust eight switches as shown below: 1. Switch 1 (LL): When this switch is set to OFF, the camera operates in the internal synchronization mode, while when it is set to ON, the camera operates in the line lock mode. In the internal synchronization mode, the camera always uses an inside crystal oscillator for synchronization. - Page 9 . Switch (LSS): This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON, the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image.
-
Page 10: Connecting Cables And Changing The Settings
Connecting cables and changing the settings ❚ Before installing your camera, you have to adjust the lens focus, zoom, and switch settings. To adjust the lens focus, zoom, and function settings 1. Remove the Cover dome and Inner cover. For more details about the removing procedures, see “Installation procedure,”... -
Page 11: Installing Camera
Installing camera ❚ Before installation Before installing your camera, you have to read the following cautions: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. -
Page 12: Adjusting The Camera Direction
4 If a hole has been drilled on the bracket installation surface for cable access, press down to remove the Cable Stopper and then draw the cable in. If connecting through the side of the camera, use the empty space opposite to the side marked CAMERA FRONT. 5 Now attach the Main body to the Mount bracket by rotating it in the LOCK direction after aligning the Groove mark on the Main body with the wide groove around the CAMERA FRONT inlay. - Page 13 SCC-BX...
-
Page 14: Appendix A: Specifications For Ntsc Standard
-10°C to +50°C Operation humidity Up to 90% Size 128(Ø) x 91(H)mm Weight 327g Details SCC-B5345 (Color/BW) 50IRE 0.4/0.04Lux Sens-up Off 30IRE 0.24/0.024Lux 15IRE 0.12/0.012Lux 50IRE 0.0031/0.00031Lux Sens-up x128 30IRE 0,0019/0.00019Lux 15IRE 0.0009/0.00009Lux SCC-B5344 (Color/BW) 0.4/0.4Lux 0.24/0.24Lux 0.12/0.12Lux 0.0031/0.0031Lux 0.0019/0.0019Lux 0.0009/0.0009Lux... -
Page 15: Appendix B: Specifications For Pal Standard
Dynamic CCD defect compensation Product color SCC-B534xP : White Operation temperature -10°C to +50°C Operation humidity Up to 90% Size 128(Ø) x 91(H)mm Weight 327g Details SCC-B5345 (Color/BW) SCC-B5344 (Color/BW) 50IRE 0.4/0.04Lux 30IRE 0.24/0.024Lux 15IRE 0.12/0.012Lux 50IRE 0.0031/0.00031Lux 30IRE 0,0019/0.00019Lux 15IRE 0.0009/0.00009Lux 0.4/0.4Lux... - Page 16 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.