Ground Wire Connections; Installing The Pulley Cover - Brother DA-927A Instruction Manual

4. INSTALLATION

4-2. Ground wire connections

To motor

4-3. Installing the pulley cover

7
Connect the ground wire to the sewing machine head and
motor.
* Use the correct type of ground wire and screw.
1. Secure the ground wire (2) to the sewing machine with the
M4 screw (1).
(The attachment location is indicated by the ground symbol
[A].)
2. Pass the ground wire (2) through the hole in the table.
3. Connect the ground wire (2) to the motor in accordance with
the instructions in the instruction manual for the motor.
4252B
1. Place the belt (2) onto the machine pulley (1).
* Pull the belt (2) upward when installing the pulley cover A
(3).
4253B
2. Place the pulley cover A (3) so that it is in between the eight
pulley cover sheets (4), and then secure it to the pulley cover
base with the four screws (5).
4254B
3. Push the belt (2) downward, and then install the pulley cover
B (6) to the pulley cover A (3) with the three screws (7).
4255B
DA-927A, DA-928A