Sewing - Brother DA-927A Instruction Manual

6. SEWING

6. SEWING
Attach all safety devices before using the sewing machine. If the machine is used without these devices attached, injury
may result.
Turn off the power switch at the following times.
However, the motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the
motor stops fully before starting work.
The machine may operate if the treadle is depressed by mistake, which may result in injury.
･ When threading the needle
･ When replacing the needle
･ When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or place any objects against the machine while sewing, as this may result in personal
injury or damage to the machine.
6-1. Sewing
13
CAUTION
1. Turn on the power switch.
2. Depress the foot lifter pedal (1) and place the work under the
presser foot.
3. Release the foot lifter pedal (1).
4. The machine starts running when the treadle (2) is stepped
down.
1492B
5. After sewing the work, move the work to the thread trimmer
(3) to make blank stitches, and cut the thread with it.
4263B
DA-927A, DA-928A