Adjusting The Height Between The Doors - Samsung RS2630A series Owner's Manual And Installation

ADJUSTING THE HEIGHT BETWEEN THE DOORS

Making small level adjustments between doors.
If the freezer door is higher than the refrigerator door.
Please open the doors and adjust the doors as follows:
1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter-
clockwise. Loosen the nut(①) with your finger.
NOTE
2) Please adjust the height difference between the doors turning the bolt (➁) clockwise(
( ).
When you turn clockwise (
NOTE
3) After adjusting the doors, turn the nut (①) clockwise(
bolt again with the wrench (➂) to fix the nut(①).
If you do not fix the nut ( ① )firmly, the bolt ( ➁ ) may be released.
NOTE
Adjustment location
➂ WRENCH
➁ BOLT
➀ NUT
), the door goes up.
➂ WRENCH
➁ BOLT
➀ NUT
) until the lower end of the bolt, then tighten the
➂ WRENCH
➁ BOLT
➀ NUT
23
) or counter clockwise