Adjusting The Clearance Between The Doors - Samsung SHP-2100 Owner's Manual And Installation

ADJUSTING THE CLEARANCE BETWEEN THE DOORS

Adjust Leveling first.
NOTE
Making small adjustments between doors.
If the door of the freezer is lower than that of the
refrigerator.
Adjustment part
Please open the doors and adjust them as follows:
1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁).
When you release the nut (①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly
counterclockwise direction. This will enable you to loosen the nut(①) with your fingers.
NOTE
➂ WRENCH
➀ NUT
➁ BOLT
2) Please adjust the height difference between the doors by turning the bolt (➁) clockwise (
clockwise ( ).
When you turn clockwise (
NOTE
➂ WRENCH
➀ NUT
➁ BOLT
3) After adjusting the doors, turn the nut clockwise (
tighten the bolt again with the wrench (➂) to fix the nut(①).
➂ WRENCH
➀ NUT
➁ BOLT
If you do not fix the nut ( ① )firmly, the bolt ( ➁ ) may be released.
NOTE
If the door of freezer is higher than that of the
refrigerator.
), the door goes up.
) until it reaches the lower end of the bolt, then
25
Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
) or counter
➂ WRENCH
➀ NUT
➁ BOLT
➂ WRENCH
➀ NUT
➁ BOLT