REATTACHING THE REFRIGERATOR DOORS
Reattaching the Water Supply Line
While pressing the front face of coupler (➁), insert the water line (➀) in the coupler.
Carefully place front cover and push to snap it into position.
Reattaching the Front Leg Cover
Hold the front leg-cover with both hands and insert it by sliding the hooks along the guide at the bottom.
Then, lift up the leg-front-cover a little bit and snap the upper ribs into the locking tabs.
Tighten three phillips screws to the front leg cover.
Tube must be fully inserted to the
marked line to avoid leaks.
NOTE
RIB
HOOK
21
FRONT LEG COVER