Table of Contents
Advertisement
Skilled application
The 90° screwdriver is intended only for skilled application in surgery according to its purpose of use in compliance
with the valid health and safety at work regulations, the valid accident prevention regulations as well as in
compliance with these instructions for use . The 90° screwdriver should only be prepared for use and maintained by
staff who have been trained in procedures for infection control, personal safety and patient safety . Improper use
(e .g . poor hygiene and maintenance), non-compliance with our instructions or the use of accessories and spare
parts which are not approved by us for the WSD-90, invalidate all claims under warranty and any other claims .
Service
If you observe any problems, contact an authorized service partner immediately (see page 40) . Repair and
maintenance work must only be carried out by an authorized service partner .
MANDIBLE-00000901_RevG
Instructions for Use for MODUS 90° Screwdriver
Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis Holding AG, 4057 Basel/Switzerland
7
Advertisement
Table of Contents
