Medartis WSD-90 Instructions For Use Manual page 25

Mechanical cleaning and disinfection internal and external
The 90° screwdriver can be cleaned and disinfected in a thermo washer disinfector .
Medartis recommends processing in the thermo washer disinfector .
> Follow the manufacturer's recommendations for devices and cleaning and rinsing agents .
> Ensure that the 90° screwdriver is completely dry, both inside and out, following thermo washer
disinfection . Remove any liquid residues with compressed air .
> Oil the dry 90° screwdriver immediately after thermodisinfection .
MANDIBLE-00000901_RevG
Instructions for Use for MODUS 90° Screwdriver
Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis Holding AG, 4057 Basel/Switzerland
25