Table of Contents
Advertisement
7. Technical data
Transmission ratio
Motor connection according to standard
Chuck system
Note: only use tools approved for the 90° screwdriver! *
Max . speed
Max . torque on tool *
Drive torque at stable speed
-1
min
(revolutions per minute)
* For tools which are not approved for use in the 90° screwdriver by the manufacturer, the user must choose
the correct operating conditions in order to ensure that there is no risk to the user, the patient or third parties .
** We recommend using the M-2438 torque head in order to protect the gear mechanism .
MANDIBLE-00000901_RevG
Instructions for Use for MODUS 90° Screwdriver
Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis Holding AG, 4057 Basel/Switzerland
1 . 7 5:1
ISO 3964
[mm]
2 .35
W&H special chuck system
-1
[min
]
1,750
[Ncm]
[Ncm]
at least 3
120
35
Advertisement
Table of Contents
