MANDIBLE-00000901_RevG
Instructions for Use for MODUS 90° Screwdriver
Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis Holding AG, 4057 Basel/Switzerland
Changing the rotary instrument
Push the tension clamp forwards in an axial direction .
Then insert the tool into the head until it reaches
the stop .
Turn the tool in order to make sure that it is fully
inserted .
Pull the tension clamp completely backwards in
the axial direction until it engages .
The tension clamp should engage without
force being exerted . If the tension clamp does
not engage, check steps 2 and 3 .
Check that the tool is secure by applying axial
tension .
13