Table of Contents
Advertisement
Sterilization and storage
We recommend sterilization according to EN 13060, class B .
> Note the instructions of the unit manufacturer .
> Clean, disinfect and lubricate prior to sterilization .
> The 90° screwdriver is designed for sterilization in the corresponding instrument tray . Please observe the
instructions for use provided .
> If the 90° screwdriver is to be sterilized individually, wrap the 90° screwdriver and accessories in sterile goods
packaging according to EN 868-5 .
> Make sure that you only remove dry sterile goods from the sterilizer .
> Store sterile goods in a dust-free and dry condition .
The standard ISO 7785-2/ISO 14457 stipulates a durability of at least 250 sterilization cycles .
In the case of the Medartis 90° screwdriver, we recommend you carry out a regular service after 500
sterilization cycles or one year .
MANDIBLE-00000901_RevG
Instructions for Use for MODUS 90° Screwdriver
Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis Holding AG, 4057 Basel/Switzerland
32
Advertisement
Table of Contents
