Medartis WSD-90 Instructions For Use Manual page 31


MANDIBLE-00000901_RevG
Instructions for Use for MODUS 90° Screwdriver
Medartis, APTUS, MODUS, TriLock, HexaDrive and SpeedTip are registered trademarks of Medartis Holding AG, 4057 Basel/Switzerland


Test run following oil service
Position the 90° screwdriver with the head

pointing downwards .
Let the 90° screwdriver run for 30 seconds in

order to remove excess oil . Start at the minimum
speed and increase to maximum speed within
5-10 seconds .
> Repeat the entire hygiene and maintenance
process if dirt emerges .
Wipe the 90° screwdriver with gauze or a

soft cloth .
31