Install The Water Filter - Samsung RS2530B Series Owner's Manual And Installation

Samsung refrigerator owner's manual
Hide thumbs Also See for RS2530B Series:
Table of Contents

Advertisement

INSTALLATION OF THE WATER DISPENSER LINE

Install the water filter.

The water filter is located in the extra space behind the Deli Bin.
NOTE
1) Remove the fixed cap (A) as shown. the fixed cap separates from the Water Filter Compartment by
rotating it as shown.
Remove the water filter from the box and put a month
indicator stick on the filter as shown.
Keep the cap(A) in a safe place for recapping, when you
NOTE
don't need to use the filter.
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the Red protective cap from the filter, then position and insert the filter as shown.
4) Slowly turn the water filter as shown below to align the indication mark on the cover, locking the filter in
position. Do not overtighten.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
• Please check that the indication line aligns with the lock position.
NOTE
Remove any residual matter inside the water supply line after installing filter.
1) Turn on the main water supply & shut-off valve of the water
supply line.
2) Run water through the dispenser until the water runs clear
(6~7 minutes). This will clean the water supply system and
clear air from the lines.
3) Additional flushing may be required in some households.
4) Open the refrigerator door and check if water leaks around
the water filter.
• A newly-installed water filter cartridge may cause water to briefly
spurt from the dispenser.
NOTE
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.
ICE
26
(A)
WATER

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents