Radio Shack Optimus 5100 Owner's Manual page 25

Program Start Announcement
Program Guide for Timer Events
Optimus ® System 5100 Owner's Manual
When a Timer event is
about to start, the system
turns on (if it is off) and a
warning message
displays one minute
before the Event starts.
If you don't interrupt the
Timer function, the
program starts as
scheduled. Highlight
Continue and press Sto
clear the warning from
the screen.
You can cancel the the event by Highlighting Cancel and pressing S .
If you select Cancel, this cancels the Start Warning Screen and the
program will not display.
During the Event
During an event, you cannot control any functions on the receiver.
All remote control keys as well as the Front Panel keys are blocked.
You can, however, press EXIT. If you press EXIT, the event is
canceled.
At the end of a timed event, the system returns to normal viewing
(and turns off, if it was off before the event started).
If an event is programmed in the Timer, then the Program Guide
will show a timer icon in the program's time slot. This indicates that
that program is stored in the Timer.
The Main Menu
Your Program is about to start!
True Lies
The program
is going to start at 8:30pm.
You have configured your receiver to record this
program onto your VCR. To continue with this
event select Continue or do nothing.
To cancel this event, select Cancel.
Use or , and Select.
Continue
Cancel
tim_war1.*
25