Golden Technologies GP162 Owner's Manual page 19

Footrest Angle Adjustment
1. Fold the footrest upward for easy access to the angle adjustment bolt. See figure 10.
2. Turn the jam nut counter-clockwise with a 17mm wrench to loosen.
3. Use an 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt
counter-clockwise to increase the footrest angle. Turn the adjustment bolt clockwise to
decrease the footrest angle.
4. When the desired footrest angle is reached, retighten the jam nut.
Angle Adjustment
Bolt (8mm Allen)
Footrest Height Adjustment
1. Remove front body shroud by lifting it up and off of the power chair base.
2. Use a 10mm socket and 4mm Allen wrench to remove the bolts indicated in figure 11.
3. Slide the footrest to the desired height.
4. Align the bolt holes in the footrest and the footrest bracket.
5. Install and tighten the bolts.
Bolts (4mm Allen)
VI. COMFORT SETTINGS
Figure 10
Figure 11
19
Jam Nut
(17mm)
Lock Nuts (10mm)