Download Print this page

Specifications; Setup - Central Machinery 61790 Owner's Manual & Safety Instructions

2hp, 5micron, 70 gallon dust collector

Advertisement

Specifications

Setup - Before use:
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
turn the power Switch of the appliance off and unplug the appliance from its
electrical outlet before performing any procedure in this section.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
assembly
1. Place Caster (39) in place on the underside corner
of the Base Plate (40). For all four corners of the
Caster insert one Screw (5) through Washer (21)
down into Base Plate and through Caster. Thread
on Nut (38). Repeat for remaining three Casters.
2. Attach the first Collector Support (29) to the
Base Plate. Line up the Collector Support with
holes on edge of the Base Plate. Insert Bolt (16)
down through Washers (15,14), Base Plate and
secure in place with Nut (2). (See Figure A.)
Bolt (16)
Figure a
Page 4
Electrical Rating
RPM
Bag Dimensions
Bag Filtration Ratio
Intake
Exhaust Diameter
collector
Support (29)
Base
plate (40)
For technical questions, please call 1-888-866-5797.
120VAC / 60Hz / 15A / 2HP
Single Phase
3450
Top=19-1/2" Dia. x 30"L
Bottom=19-1/2" Dia. x 30-7/8"L
5 Microns
4-3/8" ID (screen & filter)
4-1/2 Inch ID With Screen
3. Repeat for second Collector Support on
the opposite edge of the Base Plate.
4. Attach the third Collector Support through
the inside holes near where the Motor
Base (41) will be mounted. (See Figure B)
Insert Bolt down through Washers and Base
Plate and secure in place with Nut.
Motor (27)
Motor Base
Figure B
5. The Fan Housing (17) is attached to the Motor (27)
and Motor Base as a single unit. Secure the Motor
Base to the Base Plate (40) using six Bolts, twelve
Washers and six Nuts. (See Figure B and Figure C.)
227541
collector
Support (29)
Bolt (16)
(41)
Item 61790

Hide quick links:

Advertisement

loading