Table of Contents
Advertisement
1HP MINI DUST COLLECTOR
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
©
Copyright
2005 by Harbor Freight Tools
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model 94029
®
. All rights reserved. No portion of this
®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Central Machinery 94029
Summary of Contents for Central Machinery 94029
- Page 1 Copyright 2005 by Harbor Freight Tools manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. ® ®...
-
Page 2: Product Specifications
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the SKU 94029 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICATIONS Item... -
Page 3: Electrical Safety
“W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock. Stay alert. Watch what you are doing, and use common sense when oper- SKU 94029 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY... - Page 4 Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. SKU 94029 For technical questions, please call 1-800-444-3353. TOOL USE AND CARE...
-
Page 5: Specific Safety Rules
Dust Collection system to avoid exceeding dust limits. Each application is unique, and your maintenance schedule must be tailored to your specific use of the Dust Collector. SKU 94029 For technical questions, please call 1-800-444-3353. SERVICE SPECIFIC SAFETY RULES... - Page 6 Maintain labels and nameplates on the Dust Collector. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment. Improperly connecting the grounding wire can result in the risk of electric shock.
-
Page 7: Grounded Tools: Tools With Three Prong Plugs
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with SKU 94029 For technical questions, please call 1-800-444-3353. NOTE: THIS PRODUCT IS EQUIPPED WITH A 3 PRONG PLUG. -
Page 8: Extension Cords
“W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified SKU 94029 For technical questions, please call 1-800-444-3353. EXTENSION CORDS... - Page 9 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0 16.1-20.0 *Based on limiting the line voltage drop to five volts at 150% of the rated amperes. SKU 94029 For technical questions, please call 1-800-444-3353. (120 VOLT) EXTENSION CORD LENGTH FEET FEET FIGURE C SYMBOLOGY...
-
Page 10: Assembly Instructions
When unpacking, check to make sure all that all the parts listed in the Parts List on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the phone number shown on the front cover of this manual as soon as possible. -
Page 11: Operating Instructions
120 volt, grounded, electrical outlet. (See Figure F.) If the Dust Collector is connected to a machine, turn the Power Switch (8) of the Dust Collector to its “ON” position. Then, turn on the machine. If the Dust Collector is connected to a floor sweep accessory, hold the floor sweep acces- sory firmly to keep it from “whiplashing”. -
Page 12: Power Switch
Power Cord Plug (1) from its electrical outlet. Then store the Dust Collector in a safe, clean, dry location out of reach of children and unauthorized users. SAFETY KEY BRUSH COVER (3) CARBON BRUSH (4) INSPECTION, MAINTENANCE, AND CLEANING WARNING! Always make sure the Power Switch (8) is in its “OFF” posi- tion, and unplug the Power Cord/Plug (1) from its 120 volt electrical outlet before performing any inspection, adjustments, maintenance, or cleaning. -
Page 13: Please Read The Following Carefully
Ground Conductor Cover Hex Screw Lock Washer Gasket Collector Cover Gasket Impeller Washer Hex Nut SKU 94029 For technical questions, please call 1-800-444-3353. All maintenance, service, or repairs not listed in this manual PARTS LIST Qty. Part # Description Qty. Collector Bag... -
Page 14: Assembly Diagram
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 94029 For technical questions, please call 1-800-444-3353. Page 14...
Need help?
Do you have a question about the 94029 and is the answer not in the manual?
Questions and answers