Product Specifications; General Safety Rules - Central Machinery 31810 Owner's Manual & Safety Instructions

PRODUCT SPECIFICATIONS

Electrical Input
Intake Diameter
Collection Capacity
Maximum Air Flow
SAVE THIS MANUAL
You will need this manual for
the safety warnings and precautions,
assembly, operating, inspection,
maintenance and cleaning procedures,
parts list and assembly diagram. Keep
your invoice with this manual. Write the
invoice number on the inside of the front
cover. Keep this manual and invoice in a
safe and dry place for future reference.

GENERAL SAFETY RULES

READ AND UNDERSTAND ALL
INSTRUCTIONS
Failure to follow all instructions listed
in the following pages may result in
electric shock, fire, and/or serious
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and
well lit. Cluttered benches and dark
areas invite accidents.
2. Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases, or dust. Power tools create
sparks which may ignite flammables.
31810 For technical questions, please call 1-888-866-5797.
120V / 60 Hz / 1 HP
3 Prong Power Plug
6' Power Cord Length
4" OD
13 Gallons
660 CFM
WARNING!
injury.
3. Keep bystanders, children, and
visitors away while operating a
power tool. Distractions can cause
you to lose control. Protect others
in the work area from debris such as
chips and sparks. Provide barriers or
shields as needed.
ELECTRICAL SAFETY
1. Grounded tools must be plugged
into an outlet properly installed
and grounded in accordance with
all codes and ordinances. Never
remove the grounding prong or
modify the plug in any way. Do
not use any adapter plugs. Check
with a qualified electrician if you
are in doubt as to whether the
outlet is properly grounded. If the
tools should electrically malfunction
or break down, grounding provides a
low resistance path to carry electricity
away from the user.
2. Double insulated tools are
equipped with a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized
outlet only one way. If the plug
does not fit fully in the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician
to install a polarized outlet. Do
not change the plug in any way.
Double insulation
need for the three wire grounded
power cord and grounded power
supply system.
3. Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges, and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
eliminates the
Page 2