Toshiba RAV-GM301ATP-E Service Manual page 82

No. Part name
Pulse Motor Valve
9
(PMV) coil
Fan guard
10
Procedure
1. Detachment
1) Perform works of items
2) Release the coil from the concavity by
turning it, and remove coil from the PMV.
2. Attachment
1) Put the coil deep into the bottom posi-
tion.
2) Fix the coil firmly by turning it to the
concavity.
1. Detachment
1) Perform works of items 1 of
2) Remove the front cabinet, and put it
down so that fan guard side directs
downward.
CAUTION
Perform works on a corrugated cardboard,
cloth, etc. to prevent flaw on the product.
3) Remove the hooking claws by pushing
with minus screwdriver along with the
arrow mark in the right figure, and
remove the fan guard.
2. Attachment
1) Insert claws of the fan guard in the hole
of the front cabinet. Push the hooking
claws (10 positions) with hands and then
fix the claws.
CAUTION
All the attaching works have completed.
Check that all the hooking claws are fixed
to the specified positions.
and .
1 2
1 and 2 .
– 82 –
FILE NO. SVM-18042
Remarks
Attachment state
Coil
Minus screwdriver
Front cabinet
Hooking claw
Front cabinet
Fan guard
PMV