Schwinn AD6 Airdyne Service Manual page 45

5. Using a #2 Phillips screwdriver, remove the indicated screws from the
Foot Step Pad.
6. Remove the Foot Step Pad and replace it.
7. Installation is the reverse procedure.
Note: Be sure when attaching the Crank Arm that all three pieces (Crank
Arm, Crank Cover, and Connector Arm) are properly aligned before install-
ing ANY hardware. The Crank Cover may have rotated during the Crank
Arm removal.
8. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
45