Control Panel Buttons
Control Panel LEDs
Quantum NDX NAS Tower User's Guide
There are two push-buttons located on the front of the chassis. These
are (in order from left to right) a reset button and a power on/off
button.
• Reset: The reset button is used to reboot the system.
• Power: The main power switch is used to apply or remove power
from the power supply to the server system. Turning off system
power with this button removes the main power but keeps standby
power supplied to the system. Therefore, you must unplug system
before servicing.
The control panel located on the front of the NDX Tower chassis has five
LEDs. These LEDs provide you with critical information related to
different parts of the system. This section explains what each LED
indicates when illuminated and any corrective action you may need to
take.
Chapter 3: Initial Setup and System Interface
Control Panel Buttons
11