SENSIT Technologies IRED Quick Start Instructions
Hide thumbs
Also See for IRED:
- Instruction manual (28 pages) ,
- Instruction manual (20 pages) ,
- Instruction manual (16 pages)
Table of Contents
Advertisement
Quick Links
NOTE: Start in a gas-free environment
IMPORTANT: Periodically test using known
samples of gas from 10ppm Ethane/1000ppm
Methane mix bottle.
WARNINGS:
To prevent the risk of ignition of a flammable
atmosphere, batteries must only be changed in
an area known to be non-hazardous.
To prevent ignition of flammable or combustible
atmospheres, disconnect power before servicing.
Substitution of components may impair intrinsic
safety.
Not for use in atmosphere of oxygen greater
than 21%.
851 Transport Drive
Phone: 219 465 2700
Valparaiso, IN 46383-8432
Web:
www.gasleaksensors.com
Innovative Detection Solutions
MADE IN THE USA
WITH GLOBALLY SOURCED COMPONENTS
Distributed by:
Quick-Start Instructions
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SENSIT Technologies IRED
Summary of Contents for SENSIT Technologies IRED
- Page 1 NOTE: Start in a gas-free environment Quick-Start Instructions IMPORTANT: Periodically test using known samples of gas from 10ppm Ethane/1000ppm 851 Transport Drive Phone: 219 465 2700 Methane mix bottle. Valparaiso, IN 46383-8432 Web: www.gasleaksensors.com WARNINGS: Innovative Detection Solutions To prevent the risk of ignition of a flammable atmosphere, batteries must only be changed in MADE IN THE USA an area known to be non-hazardous.
- Page 2 Use the ¼ turn locking natural concentrations, confirm screws to secure the battery pack in place. a gas measurement in a range of 50 - 2000ppm prior to use of the IRed” 2. Be certain filter assembly filter...
Need help?
Do you have a question about the IRED and is the answer not in the manual?
Questions and answers