Advertisement
Quick Links
IMPORTANT: After testing flue samples
it may be necessary to remove condensate
collected in the water/particle filter that is
included with the probe.
WARNINGS:
To
prevent
ignition
of
flammable
combustible atmospheres, disconnect power
before servicing.
Always change batteries in an environment
free of combustible gases.
Do not handle the steel portion of any hot
air probe during or too soon after sampling.
It will become hot and retain heat and burns
may occur!
851 Transport Drive
Valparaiso, IN 46383-8432
or
Innovative Detection Solutions
MADE IN THE USA
WITH GLOBALLY SOURCED COMPONENTS
Distributed by:
Phone: 219 465 2700
Web:
www.gasleaksensors.com
Quick-Start Instructions
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SENSIT Technologies CO
Summary of Contents for SENSIT Technologies CO
- Page 1 IMPORTANT: After testing flue samples Quick-Start Instructions it may be necessary to remove condensate collected in the water/particle filter that is included with the probe. 851 Transport Drive Phone: 219 465 2700 Valparaiso, IN 46383-8432 Web: www.gasleaksensors.com WARNINGS: prevent ignition flammable Innovative Detection Solutions combustible atmospheres, disconnect power...
- Page 2 AUTO ZERO is displayed. If this process does not clear the fail on the display, this could indicate a problem with the instrument or sensor. 6. Look at the display –CO (and optionally O2) readings are displayed.
Need help?
Do you have a question about the CO and is the answer not in the manual?
Questions and answers