ICONS
Temperature status
Temperature status
Temperature status
•
Managing the Projectors
: Using the icons in the <Projector List> (only applicable to 'V'-marked projectors in the monitoring window)
(Refresh): Updates the status of the projector.
(Power On): Turns on the power of the projector.
(Power Off): Turns off the power of the projector.
(Switch Source): Selects a source from HDMI, S-VIDEO, AV, PC, MP.
(Blank Off/Blank On): Turns the screen of the projector on or off.
(Mute Off/Mute On): Turns the sound mute on or
(Adjust Aspect Ratio): Adjusts the aspect ratio of the projector to either 16:9 or 4:3.
If the connected source does not have the <Media Play> feature, <MP> is not available in the Source list.
3-6
STATUS
The projector's internal temperature is
normal.(little bit high)
The projector's internal temperature is
higher than the limit.
The projector's internal temperature is too
high. The projector is turned off automati-
cally.
STATE
of.
ACTION
None. It's normal.
Refer to Action 2 in Clearing Indi-
cator Problems.
Refer to Action 3 in Clearing Indi-
cator Problems.
Using