Connecting An Av Device Using A D-Sub Cable - Samsung SP-F10 Owner's Instructions Manual

2-13 Connecting an AV device using a D-Sub cable

The appearance and the color may differ depending on the model.
Make sure that the AV device and your projector are turned off.
1. Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".
[AV IN (L-AUDIO-R)] terminal at the back of the projector to the Audio out terminal of your AV device using an
2. Connect the
audio cable (Not supplied).
2-13 Installation and Connection