Teradek Bolt Quick Start Manual

L K
A B
Bolt Pro 3G-SDI Transmitter
K J
A B
Bolt HDMI Transmitter
A: Battery Level H: SD/HD/3G-SDI Output
B: USB Port I: Video LED
C: J:
Configuration Button SD/HD/3G-SDI Input
D: Power Switch K: Video LED
E: Charge LED L: Link LED
F: 6-28VDC Input M: Ready LED
G: DC LED
C
K
D
L
E
F
G
M
H
I
J
Bolt 3G-SDI
Receiver
H F
A: Battery Level G: DC LED
B: H:
USB Port Video LED
C: Configuration Button I: HDMI Input
D: Power Switch J: Video LED
E: Charge LED K: Link LED
F: 6-28V DC Input L: HDMI Output
C
J
D
K
E
F
G
H
I
Bolt HDMI
Receiver
L F
K J
A B
Bolt 3G-SDI Transmitter
DEVICE OPERATION
Connect the Bolt Transmitter to your camera's SDI or HDMI output.
1
Connect the Bolt Receiver to your monitor's SDI or HDMI input.
Connect power to your Bolt Transmitter using the P-Tap to 2-pin cable
2
and Bolt Receiver using the included AC adapter. The transmitter
contains an internal battery (in BOLT SDI Pro and HDMI versions)
that lasts for up to 60 minutes.
Move the Bolt Transmitter power switch (D)
3
Video appears within a few seconds.
Notes:
Keep the transmitter mounted vertically to ensure optimal signal transmission.
1
Do not bundle Bolt receivers or transmitters together. For optimal performance, place multiple
2
transmitters or receivers a few feet away from one another or other wireless devices.
NEED MORE HELP?
1. Support forum: http://support.teradek.com → Contains tips, information and all the latest firmware & software updates.
2. Training videos: http://www.teradek.com/trainin
TERADEK SUPPORT STAFF: support@teradek.com or call 888−941−2111 ext2 (Mon−Fri 7am to 6pm PST)
A: Power indicator H: Video LED
B: USB Port I: SD/HD/3G-SDI Input
C: J:
Configuration Button Video LED
D: Power Switch K: Link LED
E: Charge LED L: Ready LED
F: 6-28VDC Input M: SD/HD/3G-SDI Output
G: DC LED
C
D
E
F
G
H
I
F
M
SDI cable
HDMI Cable
P-Tap to 2-pin cable
to the ON position.
g
J
K
L
Bolt 3G-SDI
Receiver
AC adapter