Table of Contents
Advertisement
MP DataLink menus
Figure 5 MP DataLink command icons and reference information
1 Download Data icon
2 Set Date and Time icon
3 Erase Memory icon
4.3.1
Download Data
Use this command to download data to the MP DataLink application.
Note: PC On must be enabled from the MP meter to download data to the MP DataLink
application (see
section 3.3 on page
1.
Click the DOWNLOAD DATA icon or select Download Data from the MP
Commands drop-down menu to download data from the MP series meter to
the computer.
2.
MP DataLink displays a confirmation box.
3.
Click OK.
Note: The MP series meter shuts down automatically after 60 seconds.
If the meter shuts off before a new data download, a prompt appears and tells
the user to check the MP-Dock connection and make sure that the MP series
meter is in the PC On mode (see
4 Disconnect icon
5 Reference Information field
6 File Name
27).
section 3.3 on page
27).
37
Advertisement
Table of Contents
