Table of Contents
Advertisement
Enable data transfer
2.
Select an available port with the highest number in the Port drop-down menu.
Note: If only None and Demo appear, close the application, and re-open it. Go to Edit.
Select Preferences and select the highest available port.
3.
Click SAVE.
Note: Vista users must edit Port Preferences every time MP DataLink is launched.
3.3 Enable MP series meter communication
To enable communication between the MP series meter, the MP-Dock and the MP
DataLink application:
1.
Set the MP series meter on the MP-Dock.
2.
Press any measurement key to power up the meter.
3.
Enable the PC On mode.
a.
Press the MR/DOWN key and hold until PC OFF displays.
b.
Press CAL/MCLR. The display may briefly indicate PC Ini and then PC On
displays.
27
Advertisement
Table of Contents
