Clear Data (Ctrl/Command Key + D); Save (Ctrl/Command Key + S) - Hach MP-Dock User Manual

MP DataLink menus
4.1.2

Clear Data (Ctrl/Command Key + D)

1. Go to the File menu and select Clear Data to clear current data from the MP
DataLink main window. The file name and any reference information is also
cleared.
Note: When there is no data in the main window, Clear data is grayed out.
A confirmation window opens.
2. Click OK to confirm. If data is not saved, MP DataLink prompts the user to
save the data before it is cleared.
4.1.3

Save (Ctrl/Command Key + S)

Go to the File menu and select Save. This command saves the data in the .hc
format, which is the shortened format that displays in the MP DataLink window and
on the MP series meter display. This format allows the user to load the data back
into the MP DataLink application at a later time.
31