Table of Contents
Advertisement
MP DataLink menus
4.2.1.1
Preferences buttons
The Preferences window has three buttons:
•
Click USE DEFAULTS to reset preferences to the original values.
•
Click SAVE to save the current preferences and apply these to the screen.
•
Click CANCEL to cancel the operation.
Note: MP DataLInk does not save user preferences in Windows Vista.
4.2.2
Reference Information
When there is no data displayed in the main window, the Reference Information
field and the Reference Information submenu are grayed out. To edit this field when
there is data in the window, perform the steps below:
1.
Go to the Edit menu and select Reference Information. The OK button
becomes visible below the Reference Information field.
2.
Edit the Reference Information field and click OK.
Note: The maximum number of characters allowed in the Reference Information field is
100.
4.3 MP Commands menu
Use the command icons
drop-down menu to send commands to the MP series meter. MP Commands
include the following:
•
Download Data
•
Set Date and Time
•
Erase Memory
•
Disconnect
36
(Figure
5) or the items located in the MP Commands
Advertisement
Table of Contents
