Section 3 Enable Data Transfer; Launch Mp Datalink Software; Windows Launch - Hach MP-Dock User Manual

Section 3 Enable data transfer
Important Note: First connect the MP-Dock to any USB port on the computer so
that the software recognizes the communication port.
Perform the following steps to enable data transfer between the MP meter, the
MP-Dock and the MP DataLink application.

3.1 Launch MP DataLink software

To launch the software, choose the appropriate operating system section below.
3.1.1

Windows launch

To launch Windows, go to Start, All Programs, MP DataLink.
The desktop icon can also be used, if applicable.
Figure 3 Launch Windows software
25