Table of Contents
Advertisement
BP68-00582A-00Eng(026~047)
Labeling the Channels
Use this feature to assign an easy-to-remember label to analog channels (i.e., "CBS", "ESPN",
"PBS2", CNN02", etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear below to the channel number.
NOTE
• If you add or delete a
TV channel, the
labeled channels will
also be added or
deleted.
1/12/06
9:09 AM
Page 43
1
Press the CH
will be labeled.
2
Press the MENU button.
Press the ... or † button to
select "Channel", then press
the ENTER button.
Press the ... or † button to
select "Name", then press
the ENTER button.
3
Press the ... or † button to
move to the channel to be
assigned to a new name,
then press the ENTER button.
Press the ... or † button to
select a letter, a number or a
blank. (Results in this
sequence: A...Z, 0...9, +, -,
✽, /, blank).
4
Press the √ button to switch
to the next field, which will
be selected.
Select a second letter or digit
pressing ... or † button, as
above.
Repeat the process to select
the last three digits.
After all settings are completed, select OK using the √ button.
Press the ENTER button to save the settings and return to the
previous menu.
To erase the assigned new name, select "Clear" by pressing
the œ or √ button, then press the ENTER button.
Press the EXIT button to exit.
or CH
button to tune to the channel that
Input
Antenna
Auto Program
Picture
Add/Delete
Favorite Channels
Sound
Name
Channel
Fine Tune
Signal Strength
Setup
LNA
Guide
Move
Input
▲
Air
2
A
Picture
▼
Air
3
Sound
Air
4
Air
5
Channel
Air
6
Setup
Guide
Move
Input
Air
2
CNN02
Picture
Air
3
Sound
Air
4
Air
5
Channel
Air
6
Setup
Guide
Move
Channel
√
: Air
√
√
√
√
√
√
√
: On
Enter
Return
Name
OK
Clear
Clear
Clear
Clear
Clear
▼
Adjust
Return
Name
▲
OK
Clear
▼
Clear
Clear
Clear
Clear
▼
Adjust
Return
English - 43
Advertisement
Table of Contents
