Table of Contents
Advertisement
BP68-00582A-00Eng(016~025)
Connections
Connecting a Digital Audio System
There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below. For more information, see your
audio system owner's manual.
If your audio system has an
1
optical digital audio input,
connect to the "DIGITAL
AUDIO OUT (OPTICAL)" jack
on the TV.
NOTE
• OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers.
See page 67 to set the digital
output format (Dolby Digital or
PCM) appropriate to your
digital audio component.
Connecting to an Analog Amplifier
The "AUDIO OUT" terminals
1
cannot be used for external
speakers. You must hook
them up to an amplifier.
When an audio amplifier is
connected to the "AUDIO
OUT" terminals: Decrease
the gain (volume) of the TV,
and adjust the volume level
with the Amplifier's volume
control.
NOTE
• If using the HDMI or Component
input on the TV, the audio output
signal is available only when the
TV's Internal Mute is set to on.
(Refer to page 68)
English - 24
1/12/06
9:06 AM
Page 24
TV Rear Panel
Audio System
TV Rear Panel
Amplifier
1
1
Advertisement
Table of Contents
