Setting The Default Channel List Mode; Labeling Channels - Analog - Samsung HL-T5055W Owner's Instructions Manual

Setting the Default Channel List Mode
You can set All, Added, or Favorite to be the Default List that appears when you press the CH LIST button,
1 Press the MENU button to display the menu.
Press the _, or T button to select Channel, then press the ENTER button.
2 Press the _, or T button to select Channel List, then press the ENTER button.
3 Press the A or T button to select Default List Mode, then press the ENTER button.
Press the h, or T button to select All, Added, or Favorite, then press the ENTER button.
The Channel list you want to appear when you press the OH LIST button.
,, Ail: Shows All the Channels hen you Press the CH LIST button Onthe remote Control.
, Added: Shows Added channels when you press OH LIST button on the remote control.
, Favorite: Shows Favorite channels when you press CH LIST buttonon the remote control.
Press the EXIT button to exit.
[_ Press the CH LIST button on the remote control to bring up the Channel Lists.
Labeling Channels - Analog
Channels can labelled, so the their cail letters appear whenever the channel is selected,
Press the MENU button to display the menu.
Press the A or T button to select Channel, then press the ENTER button.
Press the _, or T button to select Name, then press the ENTER button.
Press the _, or T button to select the channel to be assigned a new name, then press the
ENTER button.
Press the A or T button to select a letter, a number or a blank (Results in this sequence:
A~Z, 0~9, +, -, *,/, blank).
Press the _- button to switch to the next field, which will be selected.
Select a second letter or digit by pressing the A. or V' button, as above.
Repeat the process to select the last three digits. When you have finished, press the ENTER
button to assign the new name.
To erase the assigned new name, select Clear by pressing the 4 or _- button, then press
the ENTER button.
Press the EXiT button to exit.
_-- The names of digital broadcasting channels are automatically assigned and thus cannot
be assigned by users.