Table of Contents
Advertisement
BP68-00582A-00Eng(002~015)
Remote Control
You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left
and right sides of the TV's remote control receiver. You can also use your remote control to operate your
VCR, Cable box, DVD player or some Samsung Set-top boxes. See pages 32~33 for details.
1. POWER
Turns the TV on and off.
2. P.MODE
Adjust the TV picture by selecting one of
the preset factory settings (or select your
personal, customized picture settings.)
3. ANTENNA
Press to select "AIR" or "CABLE".
4. CHANNEL NUMBER
Press to directly tune to a particular channel.
5. -
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
"54-3", press "54", then press "-" and "3".
6. VOL +, VOL -
Press to increase or decrease the volume.
7. MUTE
Press to mute the TV sound.
8. Anynet
Runs the Anynet view functions and sets up
Anynet devices. Please refer to the Anynet
Owner's Instruction.
9. MENU
Displays the main on-screen menu.
10. CH.LIST
Displays the channel list.
11. FAV.CH (Favorite Channel)
Press to switch between your favorite
channels.
12. MODE
Selects a target device to be controlled by
the Samsung remote control (i.e., TV, STB,
VCR, CABLE, or DVD).
13. PRE-CH
Tunes to the previous channel.
14. SOURCE
Press to display all of the available video
sources (i.e., TV, Set-Top Box, VCR, DVD,
DTV).
15. CH
/
Press to change channels.
Moves from one set of screen information to
the next in TV Guide menu.
1/12/06
9:06 AM
Page 13
16. INFO
Press to display information on the TV
screen.
17. EXIT
Press to exit the menu.
18.
▲
,
▼
,
,
œ
√
Press to select highlight up, down, left, or
right. While using the on-screen menus,
press ENTER to activate (or change) a
particular item.
19. MTS (Multichannel Television
Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
20. STILL
Press to pause the current screen.
21. P.SIZE
Press to change the screen size.
22. DNSe
DNSe enhances the sound quality,
automatically controls output,
and prevents sound distortion.
Press this button to set it On or Off.
23. DNIe (Digital Natural Image
engine)
Activates DNIe Demo mode.
24. SET
Used during set up of this remote control,
so that it will work compatibly with other
devices (some Samsung Set-top boxes, VCR,
Cable box, DVD, etc.)
25. SLEEP
Press to select a preset time interval for
automatic shut off.
26. CAPTION
Controls the caption decoder.
27. VCR/DVD Controls
Controls VCR or DVD functions: Rewind, Stop,
Play/Pause, Fast Forward.
28. RESET
If your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds.
Re-insert the batteries and try using the
remote control again.
, ENTER
The blue button is only
used during the channel
list as an EXIT button.
English - 13
Advertisement
Table of Contents
