Page 1
COLOUR TELEVISION Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. TELETEXT PICTURE IN PICTURE (depending on the model) AV-LINK...
Page 2
Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty.
◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. ◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV. ◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆ F OREWORD Safety Instructions ... ■ Caution ... ■ ◆ C ONNECTING AND Front Panel Controls (depending on the model)... ■ Connection Panels (depending on the model) ... ■ Infrared Remote Control (depending on the model) ... ■ Inserting the Batteries in the Remote Control... ■...
Setting the Dolby Pro-logic ... ■ Adjusting Your Dolby Preferences... ■ Setting the Sleep Timer ... ■ Setting the Time and Switching the TV On/Off Automatically ... ■ Picture In Picture Feature (depending on the model)... ■ ◆ U SING THE...
Front Panel Controls a) Source Selection b) Local Menu Display c) Previous Channel Selection d) Next Channel Selection e) Volume Decrease (depending on the model) f) Volume Increase g) Temporary Sound Switch-Off h) Remote Control Sensor i) Power j) Stand-by & Timer Indicator...
75Ω Coaxial connector for Aerial/Cable network b) RGB AV-Link Input/Output c) Video Input/Output d) DVD Inputs e) DVD Audio Inputs f) RCA Audio Outputs g) Speaker connectors h) Center speaker connectors (depending on the model) Rear of TV Option...
(DEPENDING ON THE MODEL); PIP ON/SWAP/LOCATE/ SOURCE SELECTION (TV/VIDEO)/ SCAN/CHANNEL SELECTION (P▲/▼) INFORMATION DISPLAY MAKE THE REMOTE CONTROL WORKS FOR TV, PC (OPTION), CABLE, DVD PLAYER TUNER/CABLE NETWORK SELECTION MENU DISPLAY/ PROGRAMME SELECTION BY NAME CONTROL THE CURSOR IN THE MENU...
Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it.
A SCART socket on the rear of the television (see page 48 for further details on the various connection possibilities) Follow the instructions supplied with your VCR to tune the VCR to your television. Rear of the TV Cable Television Network Rear of the TV...
AV-link Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the TV set. ➢ If you wish to connect both a satellite receiver and a VCR, you should connect the: ◆...
Insert the wire, up to the plastic sheathing, in the hole. Release the tab. Result: The wire is pinched and held firmly in place. Repeat the operation for each wire. Connect the other end of the wires to the loudspeakers. OPTION Rear of the TV...
Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the TV and the frequency is 50 or 60Hz. Press the ON/OFF button ( I ) on the front of the television.
Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions.
Press the joystick button ( Result: The message Antenna input check is displayed. Make sure that the antenna is connected to the TV, and then press the joystick button ( Result: The Country (or Area) menu is displayed; (depending on the model).
Move the joystick up or down until the appropriate language is selected. Press the joystick button ( When you are satisfied with your choice, press the TV button ( to return to normal viewing. ) to confirm your choice. Function...
(i.e., make a signal vertical line that is as white as possible). For blue adjustment, do the same as the above. After the blue convergence is correctly adjusted, press the TV button ( ➣ Since the center convergence adjustments can not be done after completing the side convergence adjustments, do the center convergence adjustments first.
Perform Perfect Focus in the following sequence: green ➞ red ➞ blue. After the cursor flickers for one second, the Perfect focus feature ends. Press the TV button ( ) to return to normal viewing. ➣ You can use the Perfect Focus feature by simply pressing the “PERFECT FOCUS”...
(with lowest first and highest last). The programme originally selected is then displayed. ➢ To stop the search before it has finished, press the TV button ( When the channels have been stored, you can: ◆...
Manual Storing of Channels Country Austria Manual store Sort Name Channel edit Move: Manual store Prog.No. Color system AUTO Sound system Search 471 MHz Channel Fine tune Move: Sel.: Store: Manual store Prog.No. Color system AUTO Sound system Search 471 MHz Channel Fine tune Move:...
Page 23
Manual Storing of Channels If you... Know the number of the channel to be stored Do not know the channel numbers Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen.
◆ Numbers (0 ... 9) ◆ Special characters (_, –, space) When you have finished entering the name, press the joystick button ( Press the TV button ( button. The main menu is displayed. The options available in the Channel group are displayed.
◆ Press the joystick button ( Result: The channel is erased. ◆ Select Added. Add the channel ◆ Press the joystick button ( Result: The channel is added. Press the TV button ( ) to return to normal viewing. Country Austria Manual store Sort...
Then... Scroll through the Move the joystick up or down. stored channels Result: Select a specific Press the TV button ( channel Result: ➢ ◆ External inputs can be displayed and scrolled through in the same way. ◆ You can display the name of the channel or input by...
The Digital NR menu is displayed with the current option. To... Change the option Confirm the option Return to normal viewing Then... Move the joystick left or right. Press the joystick button ( Press the TV button ( Picture Adjust Custom Digital NR Size Auto wide Move: Enter: Digital NR Sel.:...
Blue screen Plug & Play Convergence Move: This function is very useful in the situation that the TV is used in weak signal. LNA amplifies the TV signal in the weak signal area, Picture but not noise. This feature is working only weak signal condition, and that is memorized on current channel, additional.
“P.SIZE” button ( ) on the remote control. Then... Move the joystick left or right. Result: The picture is changed accordingly. Press the joystick button ( Press the TV button ( Picture Adjust Custom Digital NR Size Auto wide Move:...
◆ Sharpness ◆ Tint (NTSC only) When you are satisfied with the settings, press the joystick button ) to store them. When you have finished, press the TV button ( normal viewing. button. The options available in the Picture group are displayed.
Move the joystick right. Move the joystick up or down until the Auto volume option is selected. Select the required option by moving the joystick left or right. Press the TV button ( ) to return to normal viewing. Volume Sound...
Switching the Sound Off Temporarily Selecting the Sound Mode You can switch the sound off temporarily. Example: You wish to answer the telephone. Press the MUTE button ( ) on the remote control. Result: The sound is switched off and “ When you wish to turn the sound back on, press the MUTE button ) again or either of the volume buttons.
Select the your requirement. ➢ If you want to adjust the volume level with the volume control on the TV, set to Volume. When set to Standard, you can adjust the volume level with the volume control on the audio amplifier.
Normal Sel.: Store: The Dolby mode allows you enjoy Dolby prologic surround effect fully with only surround speakers are connected to TV. This allows various modes for the main, center and rear speakers to be selected. Surround Mode Pro Logic - Normal...
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Then... Move the joystick up or down. Move the joystick left or right. Press the joystick button ( Press the TV button ( Sound Adjust Custom Auto volume Surround...
Move the joystick left or right to select the number of minutes after which the television switches to Standby. Press the joystick button ( Press the TV button ( ) to return to normal viewing. ) to confirm your selection.
Setting the Time and Switching the TV On/Off Automatically You can set the television’s clock and set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆...
Move: You can display a “Picture-In-Picture screen” within the main picture of TV program or Video input. In this way you can watch or monitor TV program or the Video input from any connected equipment while watching TV or other Video input.
Page 39
Used to interchange the main picture and the sub picture. ➢ When the main picture is in the Video mode and the sub picture is in the TV mode, you might not hear the sound of main picture when pressing the SWAP button after changing the sub picture channel.
Teletext Feature Most television channels provide a written information service via Teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered page (see diagram). Part Contents Selected page number.
The contents page is displayed. If you wish to display the actual broadcast at the same time as the Teletext page, press the TEXT/MIX button again. When you have finished, press the TV button ( viewing normally. ➢ A message box containing the words “No Text Transmission”...
◆ In letters the upper or lower half of the page ◆ To a full page ➢ To return to the normal display after using the reveal or size features, press the TV button ( Press the... TEXT/MIX. (reveal). (reveal) again.
Press the... Previous/Next page Corresponding colored button. Subpage 2. Select the required subpage. 3. Sub-pages can be scrolled by When you have finished, press the TV button ( to your normal broadcast. button. ➢ The available subpages are appeared. using the P buttons.
The WYSIWYR (What You See Is What You Record) principle means that you can start recording on your VCR a programme that you are currently watching on your TV, simply by pressing the AV-Link Record button ( ) on the remote control.
VCR Indicate that you connected a decoder to your VCR to unscramble encrypted channels To return to normal viewing, press the TV button ( Then move the joystick... ◆ up or down to select the Preset Download option ◆...
Recording Directly via the AV-Link Feature The AV-Link feature allows you to start recording on your VCR the programme you are watching on your TV, simply by pressing the AV-Link Record button ( ) on the remote control. ☛ If you are recording a source that is not directly available on the VCR’s tuner (a signal from a decoder...
Move the joystick up or down. Press the numeric buttons. Press the joystick button ( ➢ The setting information is transferred to the VCR. Press the TV button ( AV-Link Timer Programming Preset Download Auto Preset Decoder on VCR Move:...
Deciding How to Connect Up Your Audio/Video Systems You must take into account several factors when deciding how to connect your audio and/or video systems. These are: ◆ The types of connectors available on your systems ◆ Systems connected permanently to the television (VCR for example) or temporary (camcorder for example) Your television is equipped with the following connectors.
Connection Tips Here are a few hints and tips to help you decide which systems should be connected to the various connectors. System Hints and Tips ◆ For best results, use preferably a SCART or S-Video cable, in addition to a coaxial cable, to have better quality pictures via the tuner.
Connecting to the Ext 1, 2 or 3 SCART Input/Outputs ➢ Ext 1 is used for equipment with an RGB output, such as video game devices and video disc players or a VCR with the AV-Link feature. Rear of the TV EXT3 (DECODER) EXT2...
➢ The S-VIDEO/RCA(AUDIO-L+R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV Front of the TV ➀ To playback pictures and sound both the S-VIDEO and the RCA connections must be used.
) one or more times until the required input is displayed. ➢ Depending on the source selected, the pictures may appear automatically. ➢ To watch television programmes again, press the TV button ) and select the number of the channel required.
◆ When your remote control is in the CABLE or VCR/DVD mode, the volume buttons still control your TV’s volume. ◆ When your remote control is in the TV or CABLE mode, the VCR control buttons (PLAY, PAUSE, etc.) still operate your VCR.
SCART Connector Wiring (Ext 1, Ext 2 or Ext 3) If you wish to connect other equipment via the SCART connectors on your television, contact your dealer or a qualified technician to wire the A/V cable as illustrated below. Audio output R Audio input R Audio output L Audio chassis return...
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture...
Page 56
THIS APPLIANCE IS DISTRIBUTED BY: ELECTRONICS AA68-01778A-02 (ENG)