ReSound LiNX Quattro Fittings Manual page 4

Select instruments
The hearing instruments will appear in the 'Select Instruments' section.
1. When the hearing instruments to be programmed have been identified, select them by
checking the left box.
2. Assign the hearing instruments to the right and left ears by choosing the correct radio
button for the right and left sides. When pressing 'Beep Instrument', the audio signal
will be played and the LED will flash. It is recommended to beep the instrument for
confirmation that the instrument selected in the software is in fact the instrument
being used in the fitting and on the correct side.
3. Select 'Continue' in the lower right of the screen once the hearing instruments are
selected and assigned.
1
4
2
3