ReSound LiNX Quattro Fittings Manual page 3

Smart Launcher
Both ReSound Aventa and ReSound Smart Fit are contained within one software
installation. The Smart Launcher will detect ReSound LiNX Quattro, LiNX 3D and ENZO
3D hearing instruments as well as ReSound Aventa legacy instruments, and then retrieve
the software appropriate for the connected device.
1. For ReSound LiNX Quattro rechargeable 961, reboot the devices by placing them in
the charger and removing them. Or, reboot the hearing instruments by pressing and
holding the push button for 5 seconds until the LED light flashes. This indicates the
instrument is 'off'. Press and hold again until the light shows solid, meaning that is is 'on'
again.
2. Click 'Connect' in the upper right of the Smart Launcher screen.
2
3