Connecting A Vcr - Samsung PCL 5415R Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have
not yet connected to an antenna or a cable system.
1
Connect a coaxial cable between the
ANTENNA OUT terminal on the VCR
and the antenna terminal on the TV.
A coaxial cable is usually included with
a VCR. (If not, check your local elec-
tronics store).
2
Connect a set of audio cables between
the AUDIO OUT jacks on the VCR and
the AUDIO jacks on the TV.
If you have mono VCR, connect
L(mono) to VCR audio out using only
one audio cable.
3
Connect a video cable between the
VIDEO OUT jack on the VCR and the
VIDEO jack on the TV.
If you have a S-VHS VCR, use the S-
Video connections and remove the
video cable. Do not connect the video
cable and the S-Video cable to video 1
simultaneously.
Follow the instructions in "Viewing a
VCR or Camcorder Tape" to view your
VCR tape.
2.5
C T : I
HAPTER WO NSTALLATION