Advertisement
Click "Browse" to select certain firmware, click Upgrade
Local Upgrade
button for upgrading. After upgrade, phone will return to
initial interface.
Note:
After upgrade, phone needs factory default.
B.4
WEB Operation
Except regular configuration, please do not modify other corresponding
information.
C.
VOICE MENU INSTRUCTION
The phone has voice menu function; relevant information can be configured
through voice menu. After starting the phone, press 4 times the
the voice menu. Hanging off can exit the voice menu.
Main Menu:
Network
After choosing key 1, the phone will enter Submenu 1.1
Configuration
network configuration setting.
Telephone port
After choosing key 2, the phone will enter Submenu 2.1 phone
configuration
port configuration setting.
Factory Reset
After choosing key 3, enter the password; the phone will then
return to factory setting.
8
Speed Dial
configuration
Reboot
WAN Port Login
WEB Access Port
Software Version
Submenu 1.1:
key to enter
Wan port
connection type
Wan port IP
address
Wan port subnet
mask
Gateway
After choosing key 4, enter speed-dial configuration option;
enter speed-dial key, then enter the speed-dial number to
complete the configuration.
After choosing key 5, enter password; the phone will then
reboot.
After choosing key 6, enter password to set up whether WAN
port can allow logging.
After choosing key 7, enter password to set up Web access
port.
After choosing key 8, current software version will be
broadcast.
After choosing key 1, the phone will broadcast current Wan
port connection type; after entering password, DHCP or static
IP address can be set up.
After choosing key 2, the phone will broadcast current IP
address; after the broadcast is finished, IP address can be set
up.
After choosing key 3, the phone will broadcast current subnet
mask; after the broadcast is finished, subnet mask can be set
up.
After choosing key 4, the phone will broadcast current
gateway; after the broadcast is finished, gateway can be set up.
Advertisement
