Advertisement
D.
BASIC OPERATION OF SIP PHONE
Making a call
On-hook status, pick up the handset to enter the off-hook mode.
Redial
In Off-hook or Speaker mode, press
the last dialed number which will be disappeared in five minutes.
Note:
The system will empty the calling records after the telephone is rebooted, Redial
function is not available.
Answering a call
Pick up the handset to answer a call. Put back the handset to hang up.
Mute
During a call, press
to mute local voice. The mute LED will light up, indicating
MUTE
that the other party cannot hear you.
Flash
During a call, press
to hang up the current call
FLASH
10
, the SIP phone will automatically redial
REDIAL
Volume Adjustment
When the phone is in hands free mode, press
volume. The Ringer Volume can be adjusted in the WEB interface.
Message Collect
When there is message not been checked, the message LED will blink to inform
the user. In Hands free mode press the
the pre-configured Message Service Number. Extract the message according to the
voice instructions.
Restore Factory
When the phone is powered on, after boots up successfully, press 3 when enter
the voice menu, enter the phone password +
finished please reboot the phone.
E.
POE POWER SUPPLY INSTRUCTIONS
The phone can view the POE power supply level by managing the POE switch. If
powering the sound or charging stand, the power level is 0 or 6 and the maximum
value is 12.95W; If only powering a phone, the power level is 2 and the maximum
value is 6.49W. The power level of this type is 2.
to adjust the conversation
key, the phone will automatically dial
key to restore factory, after all
Advertisement
